SUPREME CUT COMPOUND
#AUDACE is a water-based compound with high cutting capacity at low speed. This is possible thanks to a selection of new generation abrasives, which will allow you to cut using a random orbital polisher similar to those obtained using a rotary polisher, thus reducing required time by up to 50% compared to traditional compounds. With #AUDACE, required time can be reduced by up to 50% compared to traditional compounds.
How to use:
#AUDACE thanks to its “ColdCut Technology “, with rotary can be worked starting from 400-600 rpm up to 1000-1200, the latter will be the speed ideal for having an excellent compromise between cut and finish even with the use of wool pads which, as is well known, leave no way out for the creation of holograms.
For the use of #AUDACE with a wool pad, we recommend an amount equal to 4 drops as it has greater absorption, while for the sponge pads 3 drops will be useful as it has less absorption. During processing, we recommend cleaning the pads frequently in order to make the most of the product’s performance and avoid the formation of dust.
#AUDACE can be worked with a random orbital starting from speed 1 useful for spreading the product on the surface to be machined about 40X40 cm, then increase to speed 3 so as to facilitate the start of the cut by the abrasive reaching maximum cutting performance at speed 5 until the compound is exhausted. To have a greater cutting capacity, with the random orbital we recommend using the “HybridPad” pad, an excellent ally for the hardest surfaces using 3 drops of product at a time, while for surfaces that require a smaller cut it will be possible to use the White or Blue. During processing, we recommend cleaning the pads frequently in order to make the most of the product’s performance and avoid the formation of dust.